Printable Platter Speed Disk - Robert G. Williams

Printable Platter Speed Disk – Better results can be attained using the turntabulator app. These discs will allow you to check the speed of your turntable. (176.4 kb/s) of usable audio data) and thus must vary the disc's rotational speed from 8 hz (480 rpm) when reading at the innermost edge. What's the speed of your turntable?

Project Aluminium Subplatter Upgrade For X1 & X2 Turntables Klapp

Printable Platter Speed Disk

How does a turntable strobe work? Place the lamp so the light is shining on the disc and set the speed selector to the. Strobe discs can be downloaded for free from many sites on the internet and require a strobe light to determine if the turntable is spinning at the correct speed.

Punch A Hole In The Marked Center Of The Disc And Place It Over The Spindle Of Your Turntable Platter.

A strobe light flashes rapidly. Again, they should be printed to scale, and be sure to use the disc suitable for the electricity supply in your country (50hz in the uk). Using a strobe disc or a mobile app.

I Hope That I Can Get This Motor To Work Because It Is Dead Silent!

Most commonly at 100 (50hz version) or 120 times a second (60hz version). The strobe disc is unique because instead of bars it has the rotational speed printed as numbers that you can read directly from the disc. Page 1 of 1 start over lowest.

To Use The Strobe Light Method, You’ll Need To Download A Strobe Disc From The Internet And Print It Off.

Sf bay area, usa if you've got three minutes to spare, you can count revolutions, 33 1/3 rpm = 100 revolutions in 3 minutes. It covers the following speeds: Any users of this free app and test disk have any input to offer?

Just Put A Little Marker On The Platter.

Print and cut out the speed disc that matches the lamp you'll be using. Download free strobe disk (in adobe pdf format) enjoy! Instructions (1) select the correct mains frequency for your country (2) print out the speed disc to the desired size (3) cut a 7.25mm hole in the centre for the spindle (4) view the disc under standard tungsten room lamp (5) bars should appear stationary

If You Suspect A Marginal Motor, Belt Or Excess Drag Pulling On The Motor And Belt, The Plattertracker™ Can Assist Your Diagnosis.

Feickert platterspeed and test disc. Just download and print out the strobe using printer. Whether it should be 16, 33.3, 45 or 78rpm you will know your record platter's speed to within 0.1 rpm's.